Voltage: 380 V AC 50Hz
Total power: 6.5 KW
Dimensions: 2200*800*1750mm
Conveyor belt: 440mm wide (sheet stainless steel belt)
Product rotating hanger: 42 pieces (aluminum taper processing parts)
UV system: 5.6KW*1
UV lamp: 460L
UV wavelength: 365nm
Equipment use: UV dispensing, data line, film printing and other light curing effects
1. When starting up, please check whether the line is connected well, and connect
it to the 380V power supply after checking
2. At startup, then turn on the power switch, at this time the red power switch
lights up, enter the operation interface for operation
3. Next, turn on the conveyor belt start button, at this time the conveyor belt is
running normally, adjust the conveyor belt speed knob next to it
The conveyor belt speed can be effectively adjusted
4. According to the curing time of different solidified materials and adjust the
power and conveyor belt speed respectively to meet the curing requirements
