Product Description

model：TM-CCD5070TP

Multi-color overprinting Full-Auto Screen Printer with 2 ccd cameras and a vision system​ for Opaque new precision material film   parameters：

Printing area	660*900mm
Printing table area	500*700mm
Printing table process	precision processing + hard anodizing
Printing table material	Customized industrial magnesium aluminum
Printing speed	10~300mm/sec
Screen rise height	50mm from the table
Maximum screen frame size	700*1200mm
Maximum screen frame thickness	35mm
Printing material thickness	0~5mm
Positioning accuracy	±0.05mm
Printing accuracy	±0.02mm
Scraper angle adjustment	0~40 degrees
Power and consumption	AC380, 50/60Hz, ~1.8Kw
Air pressure	4~6Kg/cm2
Machine size	L1500*W1100*H1650
Machine weight	About 480Kg

 

 

 

Scope of application:

ITO conductive glass/ITO conductive film/light guide plate/cold light plate/touch panel/flexible circuit

 

Product features:

1. Printing adopts WEIMIAO servo motor and synchronous belt linear transmission, with good stability

2. The horizontal and vertical fine-tuning of scraping/printing adopts separate card adjustment, with fine-tuning accuracy ±0.05mm

3. The printing platen is horizontal and vertical, with a fixed point accuracy of ±0.05mm

4. The printing platen is made of industrial magnesium aluminum with precision machining, and the horizontal surface tolerance is within ±0.01mm

5. X, Y, θ three-axis independent printing platen, with a fine-tuning accuracy of ±0.02mm

6. The horizontal fine-tuning of the distance between the platen and the screen, the distance code table is set to 1~100mm

7. The running platform adopts Xinjie servo motor plus synchronous wheel with linear slide rail to enter and exit

8. The screen clamp seat has a 4-point horizontal correction device and a 4-point pneumatic clamping device for the screen

9. The horizontally movable steel plate clamp seats on both sides are supported by linear tracks, and the front end does not tilt

10. Touch screen and LCD operation panel with more than ten functions

11. The operating system has an intelligent teaching mode, which will automatically display and troubleshoot prompts when there is improper operation or failure.

 

III. Structural description

Electric voltage stabilization method or device Power source has no voltage stabilization, PLC has built-in voltage stabilization device

Air pressure stabilization method or device The air inlet is equipped with a double combination to fix the air pressure at the required pressure

The scraper group constant pressure or device The scraper is equipped with a pressure regulating valve to fix the air pressure to a constant pressure

The screen frame clamping method or device Manual clamping on the left and right

The screen frame seat lifting method Vertical lifting

The printing component position Uses a beam to place evenly

The printing component movement method Uses Panasonic servo with timing belt drive, moving left and right

The printing plate suction method Optional automatic suction or manual suction

The printing table movement method CCD automatic alignment

Printing method switching Single/double printing, single/continuous printing

Counter Accumulated times

Operation method Touch screen control, foot switch control

Protection device Motor overload protection, safety cover protection and emergency stop switch

Spare parts Free replacement of parts during the warranty period (force majeure and human factors are not covered by the warranty)

Warranty period One year from the date of production on the machine nameplate, lifetime warranty

After-sales service Service base (Mainland China)

CCD device description

Visual alignment CCD placement combination Visual alignment CCD detection device

1. Up and down axis linear slide rail mounting bracket (2 sets) 1. High-resolution LCD display (10.4 inches)

2. 10.4-inch video camera fixed axis bracket (2 sets) 2. High-definition black and white camera

3. Front and rear/left and right axis precision fine-tuning alignment (2 sets) 3. Adjustable coaxial optical alignment mirror (50 times magnification)

4. LCD display with double crosshair positioner

CCD Screen Printing Machine Operation Instructions
The purpose is to make the printed products have good effects, improve production efficiency, and meet customer requirements
2. Scope of application
Applicable to the printed products produced by our company.
3. Responsibilities and authorities
1. The screen printing supervisor is responsible for product control and quality requirements
2. IPQC is responsible for the quality inspection of printed products
4. Operation procedures
1. The screen printing supervisor arranges production according to the "Production Flow Sheet" and keeps records. 2. The screen printing operator confirms the materials, films, screens, and inks according to the samples. 3. At the beginning of printing products, the engineer and IPQC should be notified to confirm the first product. Only after the confirmation is qualified can mass production be carried out.
5. Operation steps
1. The screen printing operator should check the thickness of the screen printing material and whether the material is consistent with the data sample. 2. The ink used for screen printing should be matched with the curing agent of the same manufacturer. The adhesion of the ink must be checked for each process. Whether the color is consistent with the sample. The dilution of the ink should be strictly controlled during the production process because it determines the font effect, ink thickness and color of the screen printing:
Screen printing screen and film management. Be sure to carefully check the film pattern before drying the screen. 3. Whether the date is consistent with the sample. Whether the film is damaged. After use, the film must be placed as required to avoid scratches and facilitate search. For films with fonts and windows, 140T should be used. Slant screen drying, while cover bottom, overprint and mirror silver process can use 100T or 120T screen. When applying photosensitive paste, you should pay attention to controlling the film thickness. The film thickness determines the effect of the screen printing pattern and the thickness of the ink. 4. Squeegee selection. Before screen printing, check whether the squeegee is scratched, damaged or deformed. For font screen printing, you should choose new squeegee or one with a sharper squeegee tip. In this way, the printed font will be clear and less toothed. The ink printed by the polished squeegee will be relatively thicker. Generally, it is recommended to use 75-degree squeegee screen printing. 5. Self-inspection and improvement of screen printing production~ Every screen printing operator should have good self-inspection ability and sense of responsibility~ When screen printing, attention should be paid to avoid incomplete characters, dense oil, dust spot light leakage, color difference, oil leakage, deviation, etc.~ Check whether the screen pattern is damaged, ink dilution, and whether the machine screen is fixed.
6. Screen cleaning~ Generally, the screen is cleaned with 718 screen washing water~ Water film is washed with 783 oil-opening water, which can prevent the film pattern from falling off and being damaged during screen washing~ Extend the service life of the screen.
7. Workshop hygiene~ Make sure to keep the production workshop, machine, materials, desktop, and floor clean and tidy, and return the necessary items and production tools to their original positions after use and place them neatly.
VI. On-site management responsibilities
1. Personnel: Personnel of this department can only be officially employed after training and assessment
2. Machinery and equipment: Cleaning, maintenance and repair of department equipment shall be strictly implemented in accordance with the machinery and equipment management system,
3. Material use management: All materials of the department shall be actually collected and kept
4. Operation method: The relevant products of this department must strictly follow the requirements of the operation instruction and production process sheet
5. If any abnormal problem occurs during the production process, production shall be stopped immediately and the supervisor and IPQC shall be informed in time,
6. Analyze the abnormal problem, come up with a solution in time, and keep records to avoid it happening again next time.

Payment Terms︰ TT / LC

Product Image