Product Description

rotary clothes 6-color manual screen printing machine with simple working table

video link:

http://youtu.be/FBgtU1-R000

https://v.youku.com/v_show/id_XNDIxNzM0NzA4MA==.html?spm=a2h3j.8428770.3416059.1

Technical Parameters:

 

Platen Area	550*450mm
Max. Frame Size	500*400mm
Max. Printing Speed	1000PCS/Hr
Printing Thickness	1-10mm
Suitable Material	Any material
Operation Mode	Manual
Rack Size	L920*W920*H830mm
Gross size	2.14*2.14*1.15 m
N.W	139KGS
G.W	152KGS

 

Features:

 

1. The machine is suitable for printing on paper, film, T-shirts, clothes, bags, pants, clothing pieces, etc.

2. Low cost but high efficiency and it's the best choice for the majority of medium and small enterprises;

3. Working pallet & the frame can be rotated and the frame can be front & back, left & right adjusted;

4. Every pallet equipped with a support frame, registration is accurate & convenient.

 

Application:

 

1. This is a rotary clothes 6-color manual screen printing machine with simple working table, suitable for printing 450mm * 550mm about the format of the fabric, paper, clothes, T-shirts and other products.

2. Widely used in multicolor printed clothing and textile sectors.

3. More suitable for heatset printing ink, printing ink thickness, ink, bright;

 

Printing dryer, 
Dryer, 
Efficient and rapid thermal ink dryer 

Applications 
Quick drying substrates cured. 
Supporting auxiliary equipment after printing rotary printing machine. 

Feature 
Warming fast, simple to use, easy to maintain 
Convenient, province, efficient and energy saving. 
All the outer surface of the aircraft using electrostatic spray process. 
The machine can freely customize the temperature reaches a certain time automatically trip. 

Configuration：

 

1，50mm squeegee 6 pcs, 
   75 degrees, solvent-resistant 
2，40 * 50cm screen printing plate 6 pcs, 
   with silk 100 mesh

3，Thermal ink dryer  1set

4，rotary clothes 6-color manual screen printing machine  1set

3 boxes 1.6 CBM 205KG
printing machine-------- Export carton , 
Dryer --------           plywood, 
Accessories ------------ carton

 

Thermal ink dryer

1. Product description:
Screen printing plate dryer is used for drying after the screen cleaning. It is easy operation, use convenient.

2. Technical Parameters (can be customed)
1, the heating area: 500 × 600 (mm)  
2, Input Voltage AC 220V/50HZ
3, the maximum temperature: 180 ℃  
4, the number of heating tubes: 6  
5, the input power 3.6kw  
6, lifting adjustable length: 180mm  
7, chiller configuration, in order to maintain the average heat does not damage clothing  
8, the machine size: 900 * 500 * 1080mm  
9, Plywood size: 980 * 610 * 290mm
10. Drying method (heat): black ceramic infrared heating tube 

3. Install and Adjust.
(1)Check if there damages after open the box.
(2)Before wiring, check the sign of machine, E is earth wire, L is firing line. N is null line. Be careful not wrong wiring.
(3)This machine should also use RCCB as Power input main switch, and use proper CSA wire. In case the wire heating will cause short out.
(4) This machine must to connect earth wire. Forbit to use if haven't connected the earth wire.

4. Operation Step.
(1)Put the screen printing plate in to the dryer.
2. Open the power. Check if the power is suitable to the requirement. Close the RCCB. 
(3)Set the temperature, open the front cover of temperature controller.
(4)Open the switch main power, move 0 to 1.
(5)Open the switch of circulating fan, the fan should normal work at this time.
(6)Open the switch of increase heating, the light on, heating tube will increase temperature gradually. The fan will stop in order to increase temperature quickly. When reach the setting temperature, stop to increase temperature. The fan starts to work, circulate the air, and decrease the temperature different.
(7)The temperature decrease to the range that temperature controller is allowed. It will control the heating tube to work again, and repeat this action.
(8)Can take out the screen printing plate that has been dried, don't need to close the power.
(9)When work is done, close the switch of increase temperature.Then waits a little while to close the circulating fan, main power and RCCB.

 

hot tags:  Automatic Screen Printing Printer

Payment Terms︰ TT / LC / West Union

Product Image